Fuji Electronics’ transistor converters are designed to meet your needs.
Our lineup includes a wide range of output and frequency bands.

FOCUS Series

FOCUS
  • Maximum Conversion Efficiency of 97%
  • Output of up to 110kW; Frequency of up to 400kHz
  • Multi-Frequency Units Available
  • Parallel Resonant Circuit Resistant to Load Fluctuations
FOCUS Standard Ratings
Model Output(kW) Frequency(kHz) Size(mm) Weight(ton)
FOCUS I-PI 70~120 10~100 800×600×2200 0.7
FOCUS II-PI 80~270 10~100 1400×600×2200 1.2
FOCUS III-PI 150~450 10~100 2000×600×2200 1.5
FOCUS III-PI/600 470~600 10~20 2200×600×2200 2.0
FOCUS Ⅳ-PI 200~1100 10~100 3200×800×2200 3.2
FOCUS Ⅳ-PI-12P
(Supports 12-Pulse)
400~1100 10~100 4600×800×2200 4.0
FOCUS V-PM 130 100~400 1200×600×2200 1.0
FOCUS VI-PM 250 100~400 2200×600×2200 2.0

FIT Series

FIT
  • Maximum Conversion Efficiency of 92%
  • Suitable for Low Output Hardening, Heating, Brazing, Shrink-Fitting, Annealing
  • Compact Size
  • Parallel Resonant Circuit Resistant to Load Fluctuations
FIT Standard Ratings
Model Output(kW) Frequency(kHz) Size(mm) Weight(ton)
FIT-I 5~30 10~100 800×600×1870 0.4

Converter Carbon Neutrality

Since the introduction of the vacuum tube converter, semiconductor switch technology has advanced and transistor converters have become mainstream. Compared to the vacuum tube-type, the transistor-type consumes 45-60% less power. Although no CO2 is directly emitted from high frequency induction heating equipment, CO2 emissions resulting from electricity consumption are reduced by several tons per year.